價格: 電議
物流: 暫無物流地址| 買家支付運費
可銷售總量: 1000件
手機: 18953435654 郵箱: agrokoko@hotmail.com
傳真: 0534-2121880 地址: 山東 德州市
郵箱:
手機:
耙地作業的速度不宜太快,不要急轉彎和倒車,盡量避免拖堆,一旦發現拖堆,不能硬拉或倒車,以免損壞耙片。應設法將土堆,并將耙片角度調到零,然后慢慢拉出。he speed of the rake should not be too fast,滅茬缺口圓盤耙, do not swerve and reverse, try to oid the towing, and once the pile is found,圓盤耙供應商, do not pull or reverse the car, so as not to damage the rake. You should try to remove the mound and adjust the rake Angle to zero, then slowly pull it out.
三、軸承組合要及時加注黃油。當耙組轉到阻力較大或者有異響時,應更換新軸承。
四、耙架上的加重盤應根據不同土質和耙的入土情況增減。配重不可加得過重,烏蘭察布圓盤耙,而且前后,左右的重量分布要均勻,以保證耙架水平。






禹城樂源機械有限公司生產的1BZ圓盤耙運行時需注意:
1、操作人員必須熟悉耙的結構、性能和使用調整方法。
2、耙在作業前必須進行檢查,以防止緊固件松動或轉動件不動,不靈活等現象。
3、拖拉機和耙作業時,不允許在耙上進行維護、修理、調整等,大中型拖拉機圓盤耙,也不允許閑人靠近,更不允許坐立在耙上。
4、耙在作業時,拖拉機液壓分配器手柄必須放在浮動位置,耙在地頭轉彎或倒退時必須升起。



