振動刀切割機-微爾技術支持-二手振動刀切割機

當前機頭的位置，就是四個軸的坐標，振動刀切割機原理，坐標是以震動刀為基準的。

帶有壓輪的五軸以上的機器，PVC振動刀切割機， 按了Z坐標位置，振動刀切割機， 將會切換機頭， 同時Z: 和W: 會變成Z1和W1， 表示已經切換到壓輪那組了， 接下來的旋轉和上下的按鈕都是針對壓輪的。如有變動或者疑問請聯系廠家技術。

Jinan Weier Laser Equipment Co.， Ltd. reminds us that regular maintenance should be done in the use of NC equipment. It should be applied correctly according to the operation rules. After closing the power supply and accessories every day， we should check the power supply of the equipment， clean up the debris and dust on the equipment， carry out equipment maintenance once a month， check whether the screw is loose， whether the lubrication system is smooth，二手振動刀切割機， and the running environment is good.

微爾振動刀如果主板沒插SD卡， 那么開機的時候會提示讀取失敗， 參數是用默認的， 你可以把參數設置正確后運行機器， 但是只要你重新開機， 參數就又變成默認的了。

If the main board is not plugged in SD card， then it will be prompted to read failure when booting. The parameters are default. You can set the parameters correctly and run the machine， but as long as you reboot， the parameters will become default again.