聯接機-圣霖國際【以人為本】-聯接機生產商

勝過機用虎鉗的柔性虎鉗，在裝夾中能有效防止工件的翻轉、傾斜，克服了機用虎鉗因配合間隙大導致工件受力不均、加工發顫等現象；解決了現有輕型、精密工件加工時裝夾不可靠的問題。

Flexible than vice machine vise， the clamping can effectively prevent the workpiece turning and tilt， overcome the machine vise for clearance to workpiece uneven stress，聯接機廠家， etc. to solve the phenomenon of processing tremble; the existing light and precision workpiece clamping reliability of the fashion。

與平鍵聯接比較，聯接機價格，花鍵聯接在強度、工藝和使用方面有下列特點：在軸上與轂孔上直接而均勻地制出較多的齒與槽，故聯接受力較為均勻；因槽較淺，齒根處應力集中較小，軸與轂的強度削弱較少。

Compared with the flat bond connection，聯接機生產商， the spline connection has the following characteristics in strength， process and use.More teeth and grooves are made directly and evenly on the shaft and hub hole， so the joint force is more uniform.

Because of the shallow groove， the stress at the root of the tooth is small， and the strength of the shaft and hub is weakened less.

一個切向鍵只能傳遞一個方向的轉矩，聯接機，傳遞雙向轉矩時，須用互成120°～130°角的兩個鍵。用于載荷很大，對中要求不嚴的場合。由于鍵槽對軸削弱較大 ，常用于直徑大于100mm的軸上。

A tangent key can only transfer the torque of one direction. When the two-way torque is passed， the two keys of 120 to 130 degrees are required. An ocion for hey load and no strict requirement. As the keyway is greatly weakened to the axis， it is often used on a shaft with a diameter larger than 100mm.