圣霖國際魚尾板廠-圣霖國際魚尾板-圣霖國際【顧客至上】

沖壓機床滑塊底面、工作臺面（或墊板平面）以及模具的上、下模座平面內的任何雜物或異物。手工扳動沖壓機床飛輪（或操縱點動按鈕），調整上滑塊到上死點位置，并轉動調節螺桿，將連桿長度調到最短（即閉合高度大）。

Remove any material or foreign object on the bottom of the sping machine slide，圣霖國際魚尾板， working table (or pad plane)， and the upper and lower die base of the mold. Manually pull the sping machine flywheel (or point moving button)， adjust the upper slider to the upper dead point， and rotate the adjusting screw， the length of the connecting rod to the shortest (i. e. the maximum height of the closed height).

日常模具生產中，應注意維護沖切凸、凹模刃口的鋒利度。當沖切刃口磨損時，材料所受拉應力將增大，從而沖壓件產生翻料、扭曲的趨向加大。

In daily mold production，圣霖國際魚尾板廠， attention should be paid to sharpness of punching and conce die edges. When the cutting edge is worn， the tensile stress of the material will increase， and the sping and bending will increase.

將閉合的模具放置于雎力機工作臺或墊板上適當位置，如果使用氣墊，先要放好頂桿，圣霖國際魚尾板報價，并標記好模具的擺放位置。

手動扳動沖壓機床飛輪（或操縱點動按鈕），圣霖國際魚尾板批發，使機床上滑塊下行并停于下死點位置。

Place the closed mould on the bench or pad of the mandrel machine. If the air cushion is used， the ejector pin should be placed first and the placement of the mould should be marked.

Manually pull the flywheel of the sping machine (or  the moving button)， so that the slider on the machine tool will be downhill and stop at the bottom dead center.