圣霖魚尾板制造-圣霖國際【用心服務】-圣霖魚尾板

日常模具生產中，應注意維護沖切凸、凹模刃口的鋒利度。當沖切刃口磨損時，材料所受拉應力將增大，圣霖魚尾板采購，從而沖壓件產生翻料、扭曲的趨向加大。

In daily mold production， attention should be paid to sharpness of punching and conce die edges. When the cutting edge is worn， the tensile stress of the material will increase， and the sping and bending will increase.

將閉合的模具放置于雎力機工作臺或墊板上適當位置，圣霖魚尾板，如果使用氣墊，先要放好頂桿，并標記好模具的擺放位置。

手動扳動沖壓機床飛輪（或操縱點動按鈕），使機床上滑塊下行并停于下死點位置。

Place the closed mould on the bench or pad of the mandrel machine. If the air cushion is used， the ejector pin should be placed first and the placement of the mould should be marked.

Manually pull the flywheel of the sping machine (or  the moving button)， so that the slider on the machine tool will be downhill and stop at the bottom dead center.

檢查、核對模具和沖壓機床。在安裝模具前，要確認沖壓機床為沖壓工藝的型號，并檢查模具的尺寸、工作要求是否與沖壓機床的技術參數（裝模高度、滑塊行程等）相匹配，沖壓機床的狀態足否良好。

Check and check die and sping machine. Before installing the mould，圣霖魚尾板價格， it is necessary to confirm that the sping machine is the designated type of the sping process，圣霖魚尾板制造， and check the size of the die and the work requirements to match the technical parameters of the designated sping machine (the height of the die， the slider stroke， etc.)， and the state of the sping machine is good or not.