魚尾板規格-圣霖國際(在線咨詢)-魚尾板

將閉合的模具放置于雎力機工作臺或墊板上適當位置，如果使用氣墊，先要放好頂桿，并標記好模具的擺放位置。

手動扳動沖壓機床飛輪（或操縱點動按鈕），使機床上滑塊下行并停于下死點位置。

Place the closed mould on the bench or pad of the mandrel machine. If the air cushion is used， the ejector pin should be placed first and the placement of the mould should be marked.

Manually pull the flywheel of the sping machine (or  the moving button)， so that the slider on the machine tool will be downhill and stop at the bottom dead center.

手鋸鋸削的注意事項

鋸條的松緊要合適，且鋸割時壓力不能太大，以防折斷傷人；

當鋸縫歪斜時，不可急于糾正，而需要慢慢地逐步糾正。

Notice of hand saw cutting

The tightness of the saw blade should be suitable， and the pressure should not be too large during sawing， so as to prevent breaking and hurting people.

When the SAW seam is skewed， it can not be corrected in a hurry，魚尾板， but it needs to be corrected gradually.

深縫：鋸削深縫時即當鋸縫的深度超過鋸弓高度時，魚尾板生產，高度時，鋸弓就會與工具相碰，無法繼續鋸削；此時應將鋸條拆出，魚尾板規格，將鋸條轉90。

Deep seam: when sawing deep seams，魚尾板價格， when the depth of the sawblade exceeds the height of the saw bow， when the height is high， the saw bow is touched by the tool and can not continue to be sawed; the saw strip should be removed and the saw blade is turned 90.