耐高溫(阻燃)電力電纜-中盛電力電纜銷往國內外耐高溫(阻燃)電力電纜 High Temperature Resistant (Flame Retardant) Power Cable 本產品適用于額定電壓0.6/1kV及以下的高溫范圍和惡劣 環境內,作電氣設備電能傳輸線。 It is used as power transmission cable for electric equipments of rated voltage 0.6/1kV or lower in bad environment or that with high temperature. 一、生產執行標準 采用企業標準Executive standard: enterprise standard 二、使用特性 Performance in Usage 1、額定電壓UO/U: 0.6/1kV。 2、電纜允許工作溫度: 氟塑料絕緣及護套為200℃; 氟塑料絕緣耐熱105聚氯乙烯護套為105℃;氟塑料絕緣硅橡 膠護套為180℃。 3、短路時(最長持續間不超過5S)電纜導體的溫度不 超過250℃。 4、電纜敷設溫度應不低于-15℃。 5、電纜的彎曲半徑如下:單芯電纜:其彎曲半徑不小于 電纜外徑的20D。 三芯電纜:其彎曲半徑不小于電纜外徑的15D。 6、氟塑料絕緣及護套型電力電纜具有優異的耐化學腐蝕 性、耐高溫及阻燃性。 1: Rated voltage UO/U: 0.6/1kV 2: Max.working temperature allowed by cable is 200℃ for cable with fluoroplastic insulation and sheath, 105℃ for cable with fluoroplastic insulation,105℃ heat resistanc and PVC sheath, and 180℃ for cable with fl uoroplastic insulation and silicon rubber sheath. 3: Max temperature of cable conductor is no more than 250℃ during short circuit (The longest lasting time is no more than 5s). 4: Temperature for installation is no less than -15℃. 5: Bending radius of cable as follows: It is no less than 20 times that of cable outer diameter for cable with single core It is no less than 15 times that of cable outer diameter for cable with 3 coreswww.dianlan315.com 6: Power cable with fluoroplastic insulation and sheath has good features of chemical corrosion resistance, high temperature resistance and fl ame retardance. 三、電纜的型號名稱 Type and Description 1、電纜的型號名稱如表1 Type and Description in Table 1 Table 1 型 號 Type 名 稱 Description FF 聚乙絕緣護套耐高溫電力電纜 High temperature resistant power cable with F46 insulation and sheath
標簽:
滁州市電力電纜
滁州市電力電纜廠家