噴漆房廢氣凈化設備，噴涂線廢氣處理（包驗收）

    噴漆房廢氣凈化設備，噴涂線廢氣處理（包驗收）噴漆房廢氣凈化設備—藍陽環保專注于揮發性有機物（VOCs）處理設備的研發生產與銷售安裝，在工業噴漆房，烤漆房，烘干房，油漆車間，噴涂線，涂裝線，噴塑線等廢氣處理應用上技術成熟，成功解決了建材家具廠，汽車、電動車、自行車制造公司，輪船制造廠，汽車4S店，汽車維修店工業產品加工制造廠，工程機械，冶金廠，塑料制品廠等企業的廢氣治理難題。

　　公司經過多年的努力及新老客戶的支持，現已發展成為集研發、制造、工程設計、工程總包和運營于一體的綜合環保公司。公司主營：活性炭吸附設備、UV光氧催化設備、等離子設備、水噴淋塔，廢氣凈化塔，酸霧凈化塔等相關工業廢氣治理設備及粉塵治理設備。

 噴漆房、烤漆房廢氣處理凈化設備工作原理：
   1、廢氣經集氣罩、管道收集后，利用離心風機引進入洗滌塔處理設備中，再通過離心風機將氣體送至煙囪系統，然后對處理之潔凈空氣進行高空排放。
   2、洗滌塔處理廢氣條件是在一定的溫度和壓力下，設備循環噴淋系統中裝置高壓噴嘴，填充材料采用填充材料，使噴液能達到霧化狀態。
   3、在氣液相開始接觸時，組份的溶解即吸收是主要的，隨著時間的延長及溶液中吸收質濃度不斷增大，吸收速度會不斷減慢，而解吸收的速度卻不斷增加。
   4、接觸到某一時刻，吸收速度和解吸速度相等，氣液相間的傳遞達到平衡相平衡。達到相平衡時表示溶解過程停止。因此此時需要更換潔凈洗滌液，否則溶液中已被吸收的組份也可能由液相重新逸回氣相，形成解吸。
   本公司產品種類繁多，廢氣處理設備產品，由于參數不同，尺寸不同，型號不同，運貨地址，價格均不同，如需采購，請咨詢客戶經理，提供參數，型號，尺寸，所用地點，使用環境等因素，客戶經理給你準確報價！

  一、工藝流程簡介：
   
   噴漆廢氣處理設備從氣體收集系統收集后，進入“活性炭吸附設備”，由于固體吸附劑表面上存在著未平衡和未飽和的分子引力或化學鍵力，因此當吸附劑的表面與氣體接觸時，就能吸引氣體分子，使其濃聚并保持在吸附劑表面，此現象稱為吸附。利用吸附劑固體表面的吸附能力，使噴漆廢氣中的VOC與大表面的多孔性吸附劑相接觸，廢氣中的污染物被吸附在固體表面上，使其與氣體混合物分離，經活性炭吸附設備處理的氣體進入U(xiǎn)V光解設備，去除有機廢氣及刺激性異味氣體后經排氣筒高空排放。
   
   二、UV光解凈化原理介紹：
   
   噴漆廢氣處理設備利用高能高臭氧UV紫外線光束分解空氣中的氧分子產生游離氧，即活性氧，因游離氧所攜正負電子不平衡所以需與氧分子結合，進而產生臭氧。

   噴漆廢氣處理設備經過活性炭吸附床處理過的廢氣進入到本凈化設備后，凈化設備運用高能UV紫外線光束及臭氧對廢氣進行協同分解氧化反應，使廢氣降解轉化成低分子化合物、水再通過排風管道排出室外。
   
   噴漆廢氣處理設備利用高能UV光束裂解廢氣中的分子鍵，破壞的核酸（DNA），再通過臭氧進行氧化反應，達到脫臭及殺滅的目的。
  網站：http://www.ptfqcl.com

    fter many years of efforts and the support of new and old customers, has developed into a collection of R & D, manufacturing, engineering design, engineering, general coacting and operations in one of the integrated environmental protection company. The company's main products: activated carbon adsorption equipment, UV equipment, light catalytic oxygen plasma equipment, water spray tower, exhaust gas purification tower, mist purification tower and other related industrial waste gas treatment equipment and dust cool equipment.    
    working principle of waste gas treatment and purification equipment in painting room and baking room:
    1. The exhaust gas is collected by a gas collecting hood and a pipeline, and then is sent into the washing tower treatment equipment by a ceifugal fan, and then the air is sent to the chimney system by a ceifugal fan, and then the upper air is discharged at the upper end of the treated clean air.
    2. The exhaust gas treatment condition of the washing tower is that the high pressure nozzle is installed in the equipment circulating spraying system under certain temperature and pressure, and the filling material adopts high efficiency filling material to make the spraying liquid reach atomization state.
    3.in the gas-liquid phase begins to contact when the dissolved component is mainly absorbed, with the increasing of conceation and prolonging the time of absorption solution, the absorption rate will continue to slow down, and the solution absorption speed is increased.

    The wide range of products, waste gas treatment equipment products, due to different parameters, different sizes, different models, shipping address, billing is, prices are different, such as the need to purchase, please contact customer manager, parameter type, size, the location, environment factors, customer manager to give you accurate quotation!
I. brief ioduction of process flow:
   The paint waste gas treatment equipment collected from the gas collection system, into the "active carbon adsorption equipment", because the agent on the surface there are no balance and unsaturated molecular attraction or chemical bonding force of solid adsorption, so when the contact surface and the gas adsorbent, can attract gas, the conceation and keep in the adsorbent surface, this phenomenon is known as adsorption. The adsorption capacity of solid surface, the porous spray VOC in exhaust gas and high surface adsorbent contact, emissions of pollutants by adsorption on the solid surface, separating it from gas mixture by gas equipment, activated carbon adsorption treatment into UV photolysis equipment, removal of organic waste and irritation the smell of gas through the exhaust tube after discharge in the sky.
Two 、 UV principle of photolysis purification:
Lacquering treatment equipment with high energy high ozone ultriolet light irradiation of UV gas, special cracking gas, such as benzene, toluene, xylene, ammonia and trimethylamine, hydrogen sulfide, dimethyl sulfide hydrogen, methyl mercaptan and dimethyl sulfide, two methyl two sulfur, carbon disulfide and styrene, H2S, sulfide, VOC, n-butanol molecular bond, make a pollutant molecules and ozone oxidation free combined into small molecule compounds harmless or less harmful, such as CO2, H2O etc..