FT-3400粉體流動行為分析儀

FT-3400粉體流動行為分析儀

FT-3400 Powder flow behior analyzer

1. 描述：Description

通過分析粉體剪切動態數據來描述流動行為表征，粉體工業在加工、存儲、運輸、料倉中常出現拱架/鼠孔結構；如壓縮拱受料倉壓力作用固結強度增加導致結拱；鍥形拱塊狀物料互相嚙合在孔口架橋成拱；粘結粘附拱水分、靜電吸附導致粉料與倉壁粘附力增強成拱；氣壓平衡拱：卸料裝置密封不好，導致大量空氣從底部漏入倉內使料層上下氣壓平衡所致；在粉粒料的貯存與輸送系統中，物料的流動性、物料之間及物料與固體壁面的摩擦；在料斗的設計中，排料口的大小、料斗壁的傾斜角以及粉料對料斗壁的壓力，設計不合理的料斗會給生產造成很大的困難；這些影響粉體流動性的行為特征無法采用傳統的測量方法來解決；本機通過測量粉體內部強度、流動函數、內部摩擦函數、密度、時間固結函數、壁面摩擦函數、粘結指數、溫濕度等動態數據定量分析上述現象和狀態. 

The flow behior characterization was described by analyzing the powder shear dynamic data, The powder  arch/rat hole structure is common during the process of processing, storage, transportation, and SiloSuch as compression arch subjected to bin pressure consolidation strength increase lead to knot the arch, The clam shape arch material meshes with each other in the arch of the aperture form arch.The adhesion arch adhere to moisture and electrostatic adsorption cause the powder and the silo wall adhesion to enhance the arch.Air pressure balance arch: the discharge device is not well sealed, causing a large amount of air to leak from the bottom into the chamber and make the upper and lower aire pressue balance.In the storage and delivery system of the powdery and granular materials, the flow of material, Friction between material and material and solid wall;In the design of hopper, The size of the discharge opening, hopper wall slope Angle andThe pressure of the powder to the wall, unreasonable design of hopper  caused great difficulties in production;The behior characteristics that affect the liquidity of the powders cannot be solved by traditional measures.This machine by measuring the internal strength, flow function, internal friction function, density function, Time consolidation function, wall friction, caking index, dynamic data such as temperature and humidity in the air ,quantitative analysis the above phenomenon and state.
二、功能描述：Functional description

參照ASTM_D6128-97；ASTM D6682-2008和Jenike方法分析粉體流動行為表征特性，通過粉體剪切、固結、時間應力與應變關系屈服強度函數實時動態數據采集和分析曲線圖，預壓縮直至穩態流動狀態. 建立莫爾圓破壞包絡線、流動因子、有效內摩擦角、屈服軌跡線、流動函數、Jenike流動性指數FI判斷流與不流及臨界點、計算料斗半頂角、粉體空隙率、松裝與壓實變化關系、.采用PC軟件建立及分析數據模型，通過對粉體流動函數FF、內摩擦函數、壁面摩擦函數、松裝密度及開放屈服強度的測量來分析粉體的表征。

Refer to ASTM D6128-97; ASTM D6682-2008 and Jenike method to analyze powder flow behior characteristics, Through the powder shear, Consolidation, the relationships between Time stress and the strain yield strength function graph real-time dynamic data collection and analysis , Pre-compression until the steady flow state. Establish Mohr circle destroys the envelope, flow factor, the effective internal friction Angle, The yield line and flow function, the Jenike liquidity index FI judging flow and no flow critical point, calculation of hopper half-apex Angle, powder void fraction, apparent and compaction change relationship, Precompression until steady flow state. Adopt PC software to establish and analyze data model, Analyze the characterization of powders by measurement of powder flow function FF, internal friction function, wall friction function, apparent density and open yield strength.

三、適用范圍Scope of application：

化工、陶瓷加工、食品、化妝品、顏料.制藥、金屬粉末、石墨粉、塑料、橡膠、混泥土、農業等粉體散粒物料領域質量管控和研究,常用于生產加工企業研發部門、科研院所、大中專院校、實驗室使用.
chemical, ceramics processing, food, cosmetics, paint, pharmaceutical, metal powder, graphite powder, plastic, rubber, concrete, agriculture, and other areas of the powder grain materials’s quality cool and research .  Is often used in the production processing enterprise R&D department, research institutes, colleges, and laboratory.

四、技術參數：Technical parameters:

1.  主應力（垂直壓力）選購Principal stress (vertical pressure)：0-300N ；0-500N

2.  扭矩范圍選購Torque range：0-10N.m；0-20 N.m （其他規格可選購）

3.剪切速度Shear rate：0.1 mm/sec～5 mm/sec.

4.采用摩爾圓定律分析摩擦函數Analysis of friction function by Moore’s law.

5.自動數據測量與處理Automatic data measurement and processing.

6.采用預壓實對樣品進行處理. The samples were treated by pre compaction.

7.剪切方式：正、反向剪切模式

Shear mode: forward and reverse shear mode.

8.儀器自動自我校準功能Instrument auto self-calibration function.
9.剪切盒，自帶兩種鋁制蓋子分別適用于內摩擦和壁摩擦，其他材料可以定制.

Shear box, with two kinds of aluminum cover for internal friction and wall friction, other materials can be customized.

10.溢料收集盤和樣品整理

Overflow collecting tray and sample finishing blade.
11.通訊接口：USB，RS-232接口

Communication interface: USB, RS-232,485 interface.

12.溫濕度范圍：8-40℃ 相對濕度在35-80%

Temperature and humidity range: 8-40℃ relative humidity of 35-80%.

13.選購：PC軟件1套應用于過程分析及數據庫建立.

Choose to buy: 1 sets of PC software used in process analysis and database establishment.
14. 電源采用Power supply 220V+10% /50Hz