簡   介

DEION

KANUO LP-1155干性脫模劑是一種噴霧式脫模劑，對大多數注塑模具成型的塑料和橡膠制品提供快捷，有效及無污染的脫模作用。

此干性脫模劑是專門為一些需要進行附帶工序的制品而特別開發的，如印刷、油漆、電鍍、熱沖壓和壓焊等要求無所謂“硅酮問題”的操作。

優 點：

-超精細噴射使整個模得到完全覆蓋

-提高光潔度，減少噴涂過量的風險

-減少因標記及運送時所產生的有關問題，快捷有效  

脫模且經濟效益，只需一次噴涂便可多次脫模

-效能高而性強的潤滑膜，能提供多次脫模，比

其他硅酮配方產品優勝

-對環境影響小，不含氯氟化碳（CFC）推進劑

-適合各類熱塑性材料的使用，特別是ABS和PS

-不會影響附帶工序操作

-縫紉線、臺面、車針和的優良潤滑劑。

KANUO LP-1155 MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective, non-staining release of plastics and rubber for most types of plastic injection moulding.

Benefits：

-Ultra fine spray gives coolled application with complete coverage

-Improved finish and reduced risk of over application

-Reduces problems associated with mang and transfer, highly economical, efficient release, only one pass required for many shots of ejection

-Effective and long lasting film provides more numbers of release than most silicone formulations

-Low environmental impact, contains no CFC propellant

-Excellent for all thermal plastic, especially ABS and PS

-Will not affect subsequent operations.

-Excellent lubricant for ing threads, table surface , needles and knives.

注意事項

PRECAUTIONS

-壓力容器，避免陽光直接照射，存放在溫度低於50°C的地方。

-切勿將容器戳穿或焚燒。

-不應噴向火焰或白熾的金屬表面。

-易燃物品。

典型組分：

推進劑                   液化

活性成份                 硅 油

操作溫度范圍             高達270℃

-Pressurised container, protect from sunlight, store at temperature below 50℃

-Do not puncture or incinerate

-Do not spray on to naked flames Inflammable

-Inflammable

Typical Date：

Propellant                     LPG                  

Solvent                     Chlorinated Solvent

Active ingredient            Silicone Oil

working Temperatrue Range   Up to 270℃