供應東莞銅編織線軟連接 東莞雅杰銅編織軟連接系列使用于高低壓電器,真空電器,高低壓開關柜,電焊機,汽車,電力機車,電爐,礦用防爆電器,發電機組,碳刷導線的軟連接、整流設備及相關產品軟體連接用。采用裸銅線及鍍錫銅線的編織帶,用冷壓方法壓制而成??筛鶕?jù)客戶要求鍍錫鍍銀。 一、銅編織線制造方法:1、銅編織線采用優質圓銅線(0.10, 0.15, 0.20)或鍍錫軟圓銅線(0.10, 0.15)以多股(24.36.48錠)經單層或多層編織成。2、銅編織線的直流電阻率(20℃)不大于0.022Ω.mm2/m, 錫銅編織鍍線的直流電阻率(20℃)不大于0.0234Ω.mm2/m。三,銅編織線常用規格按平方可從0.5平方—120平方,按常規寬度可從1mm做到80mm寬,非標的話,可做到2000平方過10000A電流,寬度做到250mm寬。 ?二、銅編織帶軟連接:采用銅絞線、銅編織線作為導體,兩端采用銅管,銅管表面鍍錫處理,接頭尺寸按客戶要求生產,再通過冷壓等特殊處理,做成軟連接、軟接地。導電率高、抗疲勞能力強。 ?? Ioduction and uses of soft copper braided wire connection英文簡介 Dongguan of Yajie copper braided connection series for use in high and low voltage electrical the vacuum electrical, low voltage switch cabinet, welding machines, automobiles, electric locomotive, electric stove, mining explosion-proof electrical generator sets, carbon brush wire soft connection, rectifier equipment and Related Products software connection. Bare copper wire and tinned copper wire braid, cold pressing method repression. Tinned silver plated according to customer requirements. A copper braided wire manufacturing method: 1, copper braided wire quality round wires (0.10, 0.15, 0.20) or Tinned round copper wire (0.10, 0.15) by the single stranded (24.36.48 ingot) or multilayer woven into. DC resistivity of copper braided wire (20 ℃) ??is not greater than 0.022Ω.mm2 / m, tin-plated copper braid line DC resistivity (20 ℃) ??of greater than 0.0234Ω.mm2 / m. Braided copper wire commonly used specifications by the square from 0.5 square -120 square, the conventional width from 1mm to 80mm-wide, non-standard, then, can be done the 2000 square too 10000A current, maximum width do 250mm wide. ?Copper braid soft connection: copper wire, copper braided wire as a conductor, both ends of the brass, brass tin-plated connector size according to customer requirements, and then by cold pressing special treatment, made ??of soft connected to the soft ground. High conductivity, and the ability of anti-fatigue. ? 標簽:
東莞市銅編織線軟連接
東莞市銅編織線軟連接廠家