PC+ABS工程塑膠原料類目 > 商鋪首頁 > 產品展示 > 東莞市工程塑膠原料廠家_供應PC+ABS工程塑膠原料，PC+ABS工程塑膠原料抗沖擊塑膠

供應PC+ABS工程塑膠原料，PC+ABS工程塑膠原料抗沖擊塑膠

東莞市工程塑膠原料廠家

價格： 電議

物流： 暫無物流地址| 買家支付運費

可銷售總量： 0件

手機： 18673107652 郵箱： 136708324@qq.com

傳真： 0769-87196524 地址： 廣東東莞市

在線詢盤聯系廠家：18673107652 0769-87196523

在線詢盤

提交詢盤信息，一呼百應會為您匹配更多優質、合適的供應商！

*采購產品：

信息不能為空！請?zhí)顚懀?/p>

*采購量/單位：

采購量不能為空！

*期望價格：

元

價格不能為空！

*報價截止日期：

截止日期不能為空！

*聯系人：

聯系人不能為空！

*聯系電話：

聯系電話不能為空！

我想要了解：

產品價格更多商品信息

請輸入您要咨詢的問題：

您的聯系方式：

郵箱：

手機：

詳細信息（供應PC+ABS工程塑膠原料，PC+ABS工程塑膠原料抗沖擊塑膠）

Property
TYPICAL PROPERTIES (1)

MECHANICAL	Value	Unit	Standard
Tensile Stress,yld,Type I,50mm/min	640	kgf/cm?	ASTM D 638
Tensile Stress,brk,Type I,50mm/min	480	kgf/cm?	ASTM D 638
Tensile Strain,yld,Type I,50mm/min	4	%	ASTM D 638
Tensile Strain,brk,Type I,50mm/min	34	%	ASTM D 638
Tensile Modulus,5mm/min	28400	kgf/cm?	ASTM D 638
Flexural Stress,yld,1.3mm/min,50mm span	980	kgf/cm?	ASTM D 790
Flexural Modulus,1.3mm/min,50mm span	26800	kgf/cm?	ASTM D 790
Tensile Stress,yield,50mm/min	63	MPa	ISO 527
Tensile Stress,break,50mm/min	43	MPa	ISO 527
Tensile Strain,yield,50mm/min	4	%	ISO 527
Tensile Strain,break,50mm/min	40	%	ISO 527
Tensile Modulus,1mm/min	2670	MPa	ISO 527
Flexural Stress,yield,2mm/min	95	MPa	ISO 178
Flexural Modulus,2mm/min	2650	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact,notched,23℃	9	cm-kgf/cm	ASTM D 256
Izod Impact,notched,-30℃	6	cm-kgf/cm	ASTM D 256
Instrumented Impact Total Energy,23℃	203	cm-kgf	ASTM D 3763
Izod Impact,notched 80103 +23℃	10	kJ/m?	ISO 180/1A
Izod Impact,notched 80103 -30℃	5	kJ/m?	ISO 180/1A
Charpy 23℃,V-notch Edgew 80103 sp=62mm	10	kJ/m?	ISO 179/1eA
Charpy -30℃,V-notch Edgew 80103 sp=62mm	5	kJ/m?	ISO 179/1eA
THERMAL	Value	Unit	Standard
Vicat Softening Temp,Rate B/50	0	℃	ASTM D 1525
HDT,1.82 MPa,3.2mm,unannealed	81	℃	ASTM D 648
CTE,-40℃ to 40℃,flow	7.30E-05	1/℃	ASTM E 831
CTE,-40℃ to 40℃,xflow	7.80E-05	1/℃	ASTM E 831
CTE,-40℃ to 40℃,flow	7.10E-05	1/℃	ISO 11359-2
CTE,-40℃ to 40℃,xflow	7.20E-05	1/℃	ISO 11359-2
Vicat Softening Temp,Rate B/50	88	℃	ISO 306
Vicat Softening Temp,Rate B/120	92	℃	ISO 306
HDT/Af,1.8 MPa Flatw 80104 sp=64mm	73	℃	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Specific Grity	1.18	-	ASTM D 792
Mold Shrinkage,flow,3.2mm(5)	0.43-0.47	%	SABIC Method
Melt Flow Rate,260℃/2.16 kgf	34	g/10 min	ASTM D 1238
Density	1.18	g/cm3	ISO 1183
Water Absorption,(23℃/sat)	0.1	%	ISO 62
Moisture Absorption(23℃/50% RH)	0.05	%	ISO 62
Melt Volume Rate,MVR at 220℃/10.0 kg	0	cm?/10 min	ISO 1133
Melt Volume Rate,MVR at 260℃/2.16 kg	30	cm?/10 min	ISO 1133
Melt Volume Rate,MVR at 260℃/10 kg	0	cm?/10 min	ISO 1133
Melt Viscosity,260℃,1500 sec-1	100	Pa-s	ISO 11443
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Compliant,94V-1 Flame Class Rating(3)(4)	1	mm	UL 94 by SABIC-IP
UL Compliant,94V-0 Flame Class Rating(3)(4)	1.5	mm	UL 94 by SABIC-IP
Source GMD,last updated:2007/07/26

THESE PROPERTY VALUES ARE NOT INTENDED FOR SPECIFICATION PURES.
PLEASE CONTACT US FOR AILABILITY IN YOUR REGION.

(1) Typical values only. Variations within normal tolerances are sible for various colors. All values are measured after at least 48 hours storage at 23℃/50% relative humidity. All properties, except the melt volume and melt flow rates, are measured on injection molded samples. All samples tested under ISO test standards are prepared according to ISO 294.
(2) Only typical data for selection pures. Not to be used for part or tool design.
(3) This rating is not intended to reflect hazards presented by this or any other material under actual fire conditions.
(4) Internal measurements according to UL standards.
(5) Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

標簽：東莞市工程塑膠原料東莞市工程塑膠原料廠家