供應深圳優質中性硅酮耐候膠 深圳優質中性硅酮耐候密封膠

優質耐候膠“美氏793A”耐候硅酮密封膠是一種中性固化的密封膠:1)不腐蝕基材;2)固化收縮率低;3)在低溫(-45°C)至高溫(+150°C)內保持一致彈性;4)柔軟抗震,耐變形;5)適合于玻璃,鋁材,石材,混凝土,磚瓦,陶瓷,塑料間的非結構性粘結密封.
說明:
1)施工溫度在5℃~40℃之間;
2)用兩塊布法清潔基材;
3)將膠嘴按需要的大小做45°切斷;
4)將膠打滿接縫處
5)約25分鐘結皮.
重要:
1)使用前請做材料相容性測試;
2)不用于結構性裝配或表面溫度(45°C)以上的材料;
3)不用于滲出油污或的材料.
注意:
遠離兒童!
避免接觸眼睛和皮膚!
如有接觸,請用水沖洗;仍然不適的請就醫檢查.
執行標準:GB/T14683-2003
保質期:9個月(<24℃)


“MEISHI793A” Weather proofing silicone sealant is a neutral cure  silicone sealant:1)Not corrosion to the materials;2)Low shrinkage on curing;3)Keep elastic in low(-45℃) and high(+150℃) temperatures; 4)High grade soft,be able to bear oscillation; 5)Suitable for glass,aluminum  material,stone,concrete,brick,ceramic,plastic,non-structural sealing.
DIRECTIONS:
1)Construcation applycabie between 5℃~40℃;
2)Substrates should be solvent cleaned using two clothes method;
3)Cut the nozzle to desired opening at 45°angle ;
4)Fill the joint completely;
5)Formation of skin in 25 minutes.
IMPORTANT:
1)Please do material compatibility testing before use；
2)Do not use in structural applications or where surface temperatures exceed 45℃ for materialsafety;
3)Incompatible oozing out oily or solvents.
PRECAUTIONS:
Keep out of the reach of children!
oid contact with eyes and skin!
In e of contact,flush with lot water;If still indised,consult a doctor.
STANDARS: GB/T14683-2003.
DURABILITY: 9Months(<24℃).
標簽： 耐候膠 密封膠   耐候膠 密封膠   深圳市硅酮耐候密封膠   深圳市硅酮耐候密封膠廠家