供應廠家直銷表面電阻測試儀優質產品，武漢電阻測定儀，廣州電阻測定儀

Volume Surface insulation resistance meter

GEST-121

Skill

Technique

Square

e

Book

Test test Instrument Co., Ltd. Beijing crown

 Host Pictures

Three electrode Image :          Powder electrode Images:

Liquid electrode Pictures

Volume of surface resistance tester (GEST-121)

Standard:

GB/T 1410-2006 《 Volume resistivity of insulating materials and surface resistivity test methods》

ASTM D257-99  《 DC resistance of the insulating material or conductance test method》

GB/T 10581-2006 《 Insulating materials at high temperatures resistance and resistivity test methods》

GB/T 1692-2008 《 Vulcanized rubber insulation resistance measurement》

GB/T 2439-2001  《Rubber, vulcanized or thermoplastic rubber conductive and dissipative resistivity measurement》

GB/T 12703.4-2010 《Textiles electrostatic properties - Part 4 : Resistivity》

GB/T 10064-2006_ 《Textiles electrostatic properties - Part 4 : Resistivity》

ONE. Overview

The instrument can measure high resistance , but also to measure micro-current . Uses the U.S. Intel Corporation LSI , so equipment is small , light weight , high accuracy . Digital LCD display directly the resistance value and current. Limit the amount of from 1 × 104Ω ~ 1 × 1018 Ω, is currently the most wide measuring range , high accuracy digital high resistance measuring instrument . Current measurement range of 2 × 10-4 ~ 1 × 10-16A. Machine test voltage 10V/50V/100V/250V/500V/1000V adjustable. This instrument has high precision , showing rapid , good stability , easy reg for rubber, plastics, films , and powders , liquids, and solids and paste shapes of various insulating materials volume and surface resistivity value determination . In addition to the instrument can measure resistance , but also directly measure weak current .

Second, the main features of

Resistance measurement range 1 × 104Ω ~ 1 × 1018Ω

Current measurement range of 2 × 10-4A ~ 1 × 10-16A

Small size , light weight , high accuracy

Resistance, current dual display

Stable performance , easy reg

All test voltage (10V/50V/100/250/500/1000V) resistance test results direct reg , replacing old-fashioned high impedance meter at different test voltages or different range when multiplied by the coefficient of trouble such as inconvenient to use , the measurement high resistance to general resistance as measured with a multimeter like simple.

High resistance measurements can measure both micro-current

Third, technical indicators

1 , the resistance measurement range : 1.0 × 104Ω ~ 1 × 1018Ω.

2, the current measurement range : 2 × 10-4A ~ 1 × 10-16A

3 , the display mode : Digital LCD

4 , built-in test voltage : 10V, 50V, 100V, 250,500,1000 V

5 , the basic accuracy : 1% ( * Note )

6, the use of the environment : Temperature : 0 ℃ ~ 40 ℃, relative humidity \u003c80%

7 , the machine test voltage : 10V/50V/100/250/500/1000V arbitrary switching

8 , the power supply in the form : AC 220V, 50HZ, power consumption is about 5W

9 , Instrument Size : 285mm × 245mm × 120 mm

10 , Weight: about 2.5KG

Fourth, the working principle

According to Ohm s law, the measured resistance Rx is equal to the applied voltage V divided by the current through the I. The traditional high impedance meter works by measuring the voltage V fixed by measuring the current flowing through the sampling resistor I to get the resistance value. As can be seen from Ohms law , since the current I is inversely proportional to the resistance , rather than proportional to the resistor value displayed is nonlinear, i.e. infinite resistance , the current is zero, that the header is at zero ∞, its the scale is very close to dense, low resolution . Entire scale is nonlinear. Also, because the resistance of different measurement , the voltage V will be some variation , so the ordinary differential impedance meter is the precision , low resolution .

The instrument is also measure the voltage V across the resistor and a current flowing through the resistor I, large scale integrated circuit via the internal voltage divided by current calculation completion , then the results obtained after A / D conversion to digital display resistor value , even the voltage V across the resistor and the current I flowing through the resistor is changed simultaneously , which shows the resistance value is not as common as a result of taking into account the measured impedance changes or voltage V and the variation of the current I , therefore, even if the measuring voltage , resistance is measured , and power supply voltage changes little effect on its results , the measurement accuracy is high ( patent ) , in theory the error can be zero , the actual errors can be done a few thousandths or very few .

Typical applications

1, measuring insulation resistance, volume resistivity , surface resistance ( rate )

2, measuring the resistance and anti-static material resistivity

3, the measurement computer room raised floor system with resistance values

4, measuring anti-static shoes , conductive shoes resistance values

5 , the photodiode dark current measurement

6 , physics, optics and materials research

Standard configuration:

1 , test equipment : 1 set

2 , Power cord : 1

3 , measuring line : 3 ( shielded wire, test wiring, grounding wire )

4, using the Manual: 1

Remarks :

The instrument is equipped with different measuring electrode ( fixtures ) can measure different materials ( solid , powder or liquid ) volume resistivity and surface resistivity or conductivity , in full compliance with the national standard GB1410-2006 solid electrical insulation materials insulation resistance, volume resistance and surface resistivity test method , ASTM D257 DC insulation resistance or conductance standard test methods .

絕緣材料體積表面電阻測定儀

GEST-121

技

術

方

案

書

北京冠測試驗儀器有限公司

主機圖片：

三電極圖片：                粉體電極圖片：

液體電極圖片

體積表面電阻測定儀（GEST-121）

符合標準：

         GB/T 1410-2006《 固體絕緣材料體積電阻率和表面電阻率試驗方法》

         ASTM D257-99《絕緣材料的直流電阻或電導試驗方法》

         GB/T 10581-2006 《絕緣材料在高溫下電阻和電阻率的試驗方法》

GB/T 1692-2008 《硫化橡膠 絕緣電阻率的測定》

GB/T 2439-2001《硫化橡膠或熱塑性橡膠 導電性能和耗散性能電阻率的測定》

GB/T 12703.4-2010 《紡織品  靜電性能的評定  第４部分：電阻率》

GB/T 10064-2006_《測定固體絕緣材料絕緣電阻的試驗方法》

一、概述

    本儀器既可測量高電阻，又可測微電流。采用了美國Intel公司的大規模集成電路,使儀器體積小、重量輕、準確度高。數字液晶直接顯示電阻值和電流。量限從1×10⁴Ω ～1×10¹⁸ Ω，是目前國內測量范圍最寬，準確度的數字超高阻測量儀。電流測量范圍為2×10^-4 ～1×10^-16Ａ。機內測試電壓為10V/50V/100V/250V/500V/1000V任意可調。本儀器具有精度高、顯示迅速、性好穩定、讀數方便， 適用于橡膠、塑料、薄膜、及粉體、液體、及固體和膏體形狀的各種絕緣材料體積和表面電阻值的測定。本儀器除能測電阻外，還能直接測量微弱電流。

二、主要特點

電阻測量范圍寬  1×10⁴Ω ～1×10¹⁸Ω

電流測量范圍為 2×10^-4Ａ ～1×10^-16Ａ

體積小、重量輕、準確度高

電阻、電流雙顯示

性能好穩定、讀數方便

所有測試電壓(10V/50V/100/250/500/1000V) 測試時電阻結果直讀，免去老式高阻計在不同測試電壓下或不同量程時要乘以系數等使用不便的麻煩，使測量超高電阻就如用萬用表測量普通電阻樣簡便。

既能測超高電阻又能測微電流

三、技術指標              

1、電阻測量范圍： 1.0×10⁴Ω ～1×10¹⁸Ω。

2、電流測量范圍為： 2×10^-4A～1×10^-16A

3、顯 示 方 式：數字液晶顯示

4、內置測試電壓： 10V 、50V、100V、250、500、1000V

5、基本準確度：1% (*注)

6、使用環境： 溫度：0℃～40℃，相對濕度<80%

7、機內測試電壓： 10V/50V/100/250/500/1000V 任意切換

8、供電形式： AC 220V，50HZ，功耗約5W

9、儀器尺寸： 285ｍｍ× 245ｍｍ× 120 mm

10、質量： 約2.5KG

四、工作原理

   根據歐姆定律，被測電阻Rx等于施加電壓V除以通過的電流I。傳統的高阻計的工作原理是測量電壓V固定，通過測量流過取樣電阻的電流I來得到電阻值。從歐姆定律可以看出，由于電流I是與電阻成反比，而不是成正比，所以電阻的顯示值是非線性的，即電阻無窮大時，電流為零，即表頭的零位處是∞，其附近的刻度非常密，分辨率很低。整個刻度是非線性的。又由于測量不同的電阻時，其電壓V也會有些變化，所以普通的高阻計是精度差、分辨率低。

本儀器是同時測出電阻兩端的電壓V和流過電阻的電流I，通過內部的大規模集成電路完成電壓除以電流的計算，然后把所得到的結果經過A/D轉換后以數字顯示出電阻值，即便是電阻兩端的電壓V和流過電阻的電流I是同時變化，其顯示的電阻值不象普通高阻計那樣因被測電壓V的變化或電流Ｉ的變化而變，所以，即使測量電壓、被測量電阻、電源電壓等發生變化對其結果影響不大，其測量精度很高()，從理論上講其誤差可以做到零，而實際誤差可以做到千分之幾或萬分之幾。

典型應用

1、測量絕緣材料電阻、體積電阻、表面電阻(率)

2、測量防靜電材料的電阻及電阻率

3、測量計算機房用活動地板的系統電阻值

4、測量防靜電鞋、導電鞋的電阻值

5、光電二極管暗電流測量

6、物理,光學和材料研究

標準配置：                     

1、測試儀器：1臺

2、.電源線：1條

3、測量線：3根（屏蔽線、測試接線、接地線）

4、使用說明書：1份

備注：

本儀器配不同的測量電極（夾具）可以測量不同材料（固體、粉體或液體）的體積電阻率和表面電阻率或電導率，完全符合國家標準GB1410－2006固體電工絕緣材料絕緣電阻、體積電阻系數和表面電阻試驗方法，ASTM D257 絕緣材料的直流電阻或電導試驗方法　等標準要求。