供應球壓痕硬度儀Ballindentationhar

Meet the standard:

GB-T3398.1-2008-塑料硬度測定儀第1部分：球壓痕法

GB-T3398.1-2008- plastic hardness tester first parts: ball indentation method

GBT 3398.2-2008 塑料 硬度測定 第2部分：洛氏硬度

GBT 3398.2-2008 plastic hardness test part second: Rockwell hardness

GBT 23257-2009 埋地鋼質管道聚乙烯防腐層

GBT 23257-2009 polyethylene coating for buried steel pipeline

產品概述：

Product overview:

塑料球壓痕硬度儀是在指用直徑為5MM的鋼球，在規定試驗負荷作用下，垂直壓入試樣表面，保持30S后計算球壓痕面積上所承受的平均壓力測試儀。

Plastic ball indentation hardness tester is refers to the use of 5MM diameter steel ball, in the specified test load, vertical pressure into the surface of the sample, the erage pressure tester is calculated to keep 30S received after the ball indentation area..

產品特點：

Product features:

1、 本儀器核心控制部分通過7寸觸摸屏設置參數并控制。

1, the instrument is the core cool part through a 7 Inch Touch screen set up parameters and cool.

2、 本儀器變形采集利用國內的微型位移傳感器技術，最小位移采集精度為：0.001MM，淘汰了利用數字千分表采集 位移精度 低、易壞及需要更換電池等缺陷

2, the collection and utilization of micro displacement sensor deformation technology leg, minimum displacement precision: 0.001MM, eliminated using digital micrometer acquisition displacement precision is low, easily broken and the need to replace the battery and other defects

3、 設置好參數后，點開始實驗后自動加載，實驗結束后自動計算結果，同時壓頭自動復位到初始位置進行下次實驗

3, after parameter setting, some began to automatic log experiment, automatic calculation results after the experiment, at the same time indenter automatic reset to the initial ition for the next experiment

4、 本儀器帶有微型打印機，可以對試驗結果進行打印。

4, the instrument with a micro printer, you can print the test results.

5、 本儀器具有3種實驗類型：球壓痕實驗、洛氏硬度、耐壓實驗

5, this instrument has 3 types of experiments: ball indentation experiment, Rockwell hardness, withstand voltage test

技術參數：

Technical parameters:

1．初負荷：

1 initial load:

球壓痕：9.8N

Ball indentation: 9.8N

洛氏：98.07N

Rockwell: 98.07N

2．試驗負荷：

2 the test load:

球壓痕：49N、132N、358N、612N、961N

Ball indentation: 49N, 132N, 358N, 612N, 961N

洛氏：588.4N、980.7N

Rockwell: 588.4N, 980.7N

3．壓頭直徑：

3 head diameter:

球壓痕：Ф5mm，Ф10mm

Ball indentation: Phi 5mm, Phi 10mm

洛氏：Ф3.175mm，Ф6.35mm，Ф12.7mm

Rockwell: Phi 3.175mm, Phi 6.35mm, Phi 12.7mm

4．試樣高度：4mm

The 4 sample height: 4mm

5．壓痕深度指示最小分度值：0.001mm

5 the indentation depth indicating the minimum graduation value: 0.001mm

6．計時量程：可以設定

6: you can set time range

7．計時精度：±1%

Timing accuracy: 7 ± 1%

8．示值精度：±1%

8: the indicating accuracy of ± 1%

9．主機變形量：≤0.04mm

9 host deformation: ≤ 0.04mm

主要配置及附件：

The main configuration and accessories:

主機一套

Host a

主機壓頭 ￠5mm

The host head - 5mm

微型打印機一臺

A miniature printer

使用說明書一份:

Using a manual:

備注：本儀器標準隨機配件為球壓痕實驗，如需要其它實驗，請另行選配

Note: this instrument standard random accessories for the ball indentation experiments, such as the need for other experiments, please use separate selection