PE燃?xì)夤艿莱凉窀稍餀C(jī)

大型除濕干燥機系統:

DDS大型除濕干燥機系統應用於塑膠使用大且露點要求低的場合。本公司制造的大型除濕干燥系統用於處理PET原料時可達800kg/h。該系統主要包含每小時干燥風量4.000m3的蜂巢轉輪式除濕機及容料量高達8.000L（於裝載PET時的有效重量為6.400kg）的保溫式干燥料桶，經由轉輪除濕機處理過后的干燥原料最終含水率可以達到0.004%以下。

Large dehumidifying drying system

When you need to use large quantity of plastic and lower dew-point, you should choose DDS series large dehumidifying drying systems.

DDS series capacity can reach 8000kg/h. This system includes honeycomb rotor dehumidi er(8000m3/h) and insulation hopper

(10000L or 8000kg PET). After treatment, the highest rate of dry raw material can reach the nal moisture content below 0.004%.

本機特點：

1. 定速攪拌設計使未結晶之塑料在晶相化的制程溫度中不沾結成塊；

2. 結晶效率高且均勻；

3. 可以簡化并提高原料干燥時的效率；

4. 原料干燥可以在高溫下進行 , 并且干燥過程可以直接使用現有的標準干燥料桶；

5. 制程溫度可透過溫控器進行準確控制；

6. 增加回收料在 PET 新料中的使用比例；

7. 可搭配除濕機 , 直接執行除濕作業；

8. 可選配螺旋送料裝置定量輸出已結晶原料。

Proudcts Features

1. Constant speed stirring uncrystallized designed so that the plastic does not stick 

in the temperature of the crystalline phase of the process to form blocks；

2. Crystallization e ciency is high and uniform；

3. It can simplify and improve the e ciency of the raw material drying process；

4. Drying of the raw material can be performed at high temperature, and the drying 

process can be used directly to the existing standard drying drum；

5. Process temperature can be accurately coolled by thermostat；

6. Increase the proportion of recycled material in the use of new PET material；

7. it is optional of the dehumidi er that can directly perform the dehumidi cation work.；

8. Optional screw feeding device output the crystallized material quantitatively.

規格表  Specifications 

產品規格若有變更，恕不另行通知

The specification is subject to change without prior notice.

 ☆機器電壓規格為 :3￠,400V,50Hz.