中山高低溫恒溫測試機廠家

ZY6013高低溫恒溫試驗箱
High and low temperature constant temperature test chamber
 
溫度范圍       -20℃、-40℃、-50℃、-65℃~+130℃
溫度波動度     ±0.5℃
溫度均勻度     >2℃
Temperature range - 20 ℃ and 40 ℃, 50 ℃, 65 ℃ ~ + 130 ℃
Temperature fluctuation degree of plus or minus 0.5 ℃
Temperature evenness > 2 ℃


型號                         工作室尺寸
Model                        studio size
ZY6013-50                    350×400×350mm
ZY6013-100                   400×450×550mm
ZY6013-225                   500×600×750
ZY6013-800                   800×1000×1000


-40℃以下為雙壓縮機具有超載保護裝置  
Below 40 ℃ for the compressor has the overload protection device  
 
符合的測試規范有：Conform to the test specifications are:
MIL STD,GB,JIS,JEDEC,IEC等。


產品優勢：Product advantage:
定值條件可設定時間： 0 ~9999小時59分鐘。 
程式容量：可編輯120組程式×1500段,每段可設定時間0~99小時59分鐘，段數可任意分割,程式可自由相互聯結。
循環設定：可執行9999×999回次數循環,且可再切割出5組獨立之部份循環。  
控制方式：斜率控制邏輯，采智能型PID+SSR/SCR正逆雙向同步輸出。 
資料設定：觸控式對話框設定模式,操作簡易明確,內建目錄數據管理系統。
曲線繪制：實際運轉溫濕度曲線記錄、顯示;當程式設定的溫、濕度、時間資料完成,可立即轉成設定曲線。
時間訊號：3組時式控制輸出接口,搭配10種之時間控制模式,方便執行外部驅動組件啟/停之時式規畫。
終了溫度：在完成測試時,可選擇執行返回常溫之狀態,以利測試物取出。  
安全檢知：全功能之系統偵測,確保機臺運轉安全.并可自動顯示故障項目。
外部保護：獨立式超溫保護裝置,可設定受測對象的溫度上限保護。  
通信接口：附RS-232及RS-485之標準通信接口裝置。　
Conditions of constant value can be set time: 0 ~ 9999 hours 59 minutes.
Program capacity: editable 120 x 1500 group program segments, each segment can be set time 0 ~ 99 hours 59 minutes, can be arbitrary section number segmentation, freely, connected.
Circulation set: 9999 x 999 back to the number of cycle, executable and can be cut out 5 groups of independent part of the cycle.
Cool mode: advanced slope cool logic, adopt intelligent PID + SSR/SCR is inverse two-way synchronization output.
Data set: touch dialog box set pattern, operation simple and clear, built-in catalog data management system.
Curve is drawn: the actual operation curve of temperature and humidity record, display; When the program set the temperature, humidity, time information is complete, can immediately to set curve.
Time signal: 3 groups of cool output interface, collocation of 10 kinds of cool mode, the time is convenient to perform external drive component type planning start/stop.
Temperature: the end of the test, normal temperature may choose to perform a return to the state, and the test content.
Safety detector: full function of the system detection, ensure the machine running safety. And can automatically display fault project.
External protection: independent type overtemperature protection device, can set the upper limit of the temperature of the object under test.
Communication interface: with the RS - 232 and RS - 485 standard communication interface device.
         
標簽：     東莞市高低溫恒溫測試機   東莞市高低溫恒溫測試機廠家