紫外線防偽熒光油墨? 紫外防偽熒光油墨?

紫外熒光油墨Fluorescent uv ink

熒光油墨是印刷中應用比較多的油墨之一，其主要成分是熒光顏料。熒光顏料屬功能性發光顏料，與一般顏料的區別在于當外來光（含紫外光）照射時，能吸收一定形態的能，而激發光子，以低可見光形式將吸收的能量釋放出來，從而產生不同色相的熒光現象。不同色光結合形成異常鮮艷的色彩，而當光停止照射后，發光現象即消失，因此稱為熒光顏料。熒光顏料與高分子樹脂連接料、和助劑配比，經研磨可制得熒光油墨。

紫外熒光油墨，又稱無色熒光油墨和隱形油墨，是在油墨中加入熒光顏料而制成的。應用紫外光（200—400nm）照射激發而發出可見光（400—800nm）的特種油墨，稱為紫外熒光油墨。根據激發波長不同分為短波和長波。激發波長為254nm的稱為短波紫外熒油墨，激發波長為365nm的稱為長波紫外熒光油墨，可顯示紅、黃、綠、藍 等顏色。

紫外熒光油墨適用印刷方式：絲印、膠印、轉印、移印

紫外熒光油墨適用底材為：紙張 布料 金屬 陶瓷 塑料等

紫外熒光油墨應用范圍：證、標簽、包裝等。

紫外熒光無色絲印油墨外觀是半透明液體狀，無色膠印類為乳黃色糊狀。

熒光油墨絲印用250-300目，可用783稀釋，稀釋比例為3%-5%

紫外熒光油墨的干燥當時是自干或UV烤干，絲印是自干，膠印是UV烤干

Fluorescent uv ink for printing: screen printing, offset printing, transfer printing, pad printing

Fluorescent uv ink applicable substrate for: paper metal ceramic plastic cloth, etc

Fluorescent uv ink application range: paper, certificate, labels, packing and so on.

Ultriolet fluorescence colorless, screen printing ink appearance is translucent liquid, colorless offset printing for the part that paste.

Fluorescent screen printing ink with a 250-300 mesh, 783 ailable solvent dilution, dilution ratio of 3% to 3%

Fluorescent UV ink drying was from dry or UV dry, screen printing is the dry, offset printing is the UV to dry

防偽特征及分類Security features and classification

熒光油墨分為紫外熒光油墨無色熒光油墨Fluorescent ink is divided into fluorescent uv ink colorless fluorescent ink

1、隱形UV紫外熒光油墨防偽：

所用材料為隱形熒光油墨，印刷工藝簡單。該油墨印刷出隱形圖案或文字，在紫外光照射廠。呈現出清晰光亮的熒光圖案。色彩鮮艷。該防偽檢測方便，只要有一紫外光源或驗鈔機即可。由于隱形熒光油墨是隱形即無色，在印刷時肉眼看不見也即無任何機器識別的跟蹤標記。所以套印起來難度較大，但該種防偽隱蔽性較好，防偽力度更強， 日前國內大多數包裝都采用該種隱形熒光油墨。

Invisible UV fluorescent UV ink anti-counterfeiting:

Materials used for invisible fluorescent ink, printing process simple. The ink printed stealth design or text, ultriolet light in the factory. Present a clear pattern of fluorescent light. Bright colors. The security detection is convenient, as long as there is a uv light source or counterfeit detector. Due to the invisible fluorescent ink is invisible or colorless, invisible to the naked eye when printed is no machine identification tracking tags. So set up is difficult, but this kind of anti-counterfeiting concealment is better, stronger anti-counterfeiting efforts, most recently domestic pharmaceutical packaging USES this kind of invisible fluorescent ink.

2、有形UV紫外熒光油墨防偽：所用材料為有形熒光油墨，印刷工藝簡單，印刷效果同普通油墨印刷效果一樣，但在紫外光照射下，印刷品呈現出異常的亮光， 此時可區別于普通油墨。

Visible UV fluorescent UV ink anti-counterfeiting: materials for the visible fluorescent inks, printing process simple, overprint accurate, the printing effect, like normal ink printing effect, but under UV irradiation, print appear abnormal light, can be different from the ordinary ink at this time.

適用范圍和注意事項Scope of application and matters needing attention

熒光油墨適于紙張、薄膜等的印刷。由于無機熒光物是由晶體發光的，若壓力過大可使晶體破裂，從而使發光亮度降低，所以一般不采用凸版印刷，很適用于網版印刷以及凹印等。大多數熒光油墨的流變特性呈仿塑性流動，黏度小，這項特性決定了其印刷工藝與普通油墨的印刷工藝有很大區別。而在進行凹印和網印時，除注意其黏性、連接料、干燥性等特性外，還要注意其印刷壓力的調節，不能使印刷壓力過大而影響印刷效果。 在進行網印時，要注意以下幾點：

（1）熒光油墨適合于200目以下的絲網；

（2）印刷品的著墨量在50～60g/㎡時，其發色和耐光性比較理想；

（3）在承印物是透明物體時，應先印一次白色油墨，這樣可提高熒光效果。

Fluorescent ink is suitable for printing paper and vinyl film, etc. Due to inorganic fluorescent material is made of crystal shine, if stress can make crystal break, so that the luminous intensity is reduced, so you don't normally use letterpress, very suitable for screen printing and grure. Most of the rheological properties of fluorescent ink in plastic flow, viscosity is small, this feature determines its printing with ordinary ink printing process is very different. In grure and screen printing, in addition to pay attention to the character of viscosity, connection material, dry, also note the printing pressure adjustment, does not affect the printing effect to make the printing pressure is too large. In the screen printing, attention should be paid to the following:

(1) the fluorescent ink suitable for below 200 mesh screen;

(2) the amount of inking print in 50 ~ 60 g / ㎡, the hair color and light fastness is ideal;

(3) in the substrates are transparent objects, you should print a white ink, which can improve the effect of fluorescence.