遇水油墨 水變油墨 遇水變色油墨 遇水油墨 千色變品牌遇水變色油墨

遇水變透明油墨 The water became transparent ink

遇水變透明油墨是水性絲印墨本身呈白色，遇水后變透明，干后還原。由于遇水變透明油墨不含有害物料，已獲得EN71-3檢測，是一種安全之水性絲印變色墨，適宜印制各式玩具，奇妙畫布，不干膠貼紙，啤酒杯墊，雨傘或有趣味玩意。 

When water becomes transparent white ink is water-based printing ink itself, meet after water is clear, dry after reduction. Because the water is clear ink does not contain harmful material, has gained EN71-3 test, is a safe, water-based printing color ink, suitable for printing all kinds of toys, wonderful canvas, stickers, beer mat, umbrella or interesting things.

印刷底材： 可印在紙類，布類(彈性不大)。Printing substrate: can be printed on paper, cloth class not (elastic).

印刷方法：可先在底材上以一般柯式或絲印，印上文字或圖案（墨色需盡量淺淡）

待圖案之油墨干透后，用43-77T/㎝絲網（水性網）將遇水變透明油墨印在圖案之表面，若需稀釋?？杉尤胄×空麴s水稀釋。遇水變透明油墨干透后會變一層白色的膜將下面圖案遮蓋。若要加強遮蓋力，待遇水變透明油墨絲印墨干后，再加印一層。 

Printing method: first on the substrate with general offset or screen printing, printed words or patterns (need) to shallow light ink

For design of the printing ink dry after appearing, 43-77 - t / ㎝ screen (water network) will encounter water became transparent ink printed in the design of the surface, if there is further diluted. Add a small distilled water dilution. Transparent ink under the influence of water will be a layer of white after dry film covering the following design. To strengthen the covering power, treatment after water became transparent ink printing ink dry, printing a layer.  

遇水油墨屬于水性油墨，只能做普通的絲印。

可自然風干或用80-100℃熱風吹3-5分鐘。 

保質期： 遇水變透明油墨水性絲印墨存放在陰涼之地方，保質期達12個月以上。

加水稀釋，加1%-2%左右稀釋，再多會起泡。

雨傘布一定要打水性底。

Water ink belong to water-based ink, can only do ordinary printing.

Can use natural airing or 80-100 ℃ hot air blowing for 3 to 5 minutes.  

Shelf life: transparent ink, water-based printing MoCun under the influence of water in a cool place, shelf life of more than 12 months.

Dilution water, add 1% to around 1%, again will blister.

The umbrella cloth water must be hit bottom.

遇水油墨印刷要求：

網紗：瑞士賽花爾、

感光膠：水油兩用（春上AD20   田凌80B）、

網版：150-200目

網張力：機器印23鈕   手工印21鈕、

刮刀：70度（新刮刀）

已涂AB液的網板先用水浸泡15分鐘，沖洗干凈

網板離臺面盡量低，不能過高！

固化劑配比為油墨的5%，先把固化劑和水?dāng)嚢杈鶆颍ㄋ呐浔葹橛湍?span>3%-5%）后再加入油墨中攪拌，這樣會比較均勻

Net yarn: Switzerland the flower,

Net edition: 150-200 mesh

Web tension: the machine is printed 23 button manually 21 button,

Scraper: 70 degrees (new blade)

have AB coating liquid sheet first soaked in water for 15 minutes and rinse clean

Curing agent ratio of 5% of the ink, the curing agent and water mix first (ratio of water to 3% - 3% of ink) and then add to the ink mixing, this will be more homogeneous

聯系方式

聯系人：龍小姐

手機：13691925362

電話：0769-82061101

傳真：0769-82061516

里巴巴網址：https://dgqianbian.1688.com

郵箱:2880301195@qq.com

公司地址：廣東東莞塘廈鎮大坪四黎南路281號寶物流園A2棟101