CX7240/沙伯基礎

Physical Properties物理性質 Metric公制數據 English英制數據 Comments測試方法 Density密度 1.20 g/cc 0.0434 lb/in? ISO 1183 Moisture Absorption at Equilibrium吸濕平衡 0.10 % 0.10 % 23°C / 50% RH; ISO 62 Water Absorption at Saturation飽和水吸收率 0.20 % @Temperature 23.0 °C 0.20 % @Temperature 73.4 °F ISO 62 Linear Mold Shrinkage, Flow線性收縮率/流動 0.0040 - 0.0060 cm/cm @Thickness 3.20 mm 0.0040 - 0.0060 in/in @Thickness 0.126 in SABIC Method Melt Flow熔體流動速率 15 g/10 min @Load 2.16 kg, Temperature 260 °C 15 g/10 min @Load 4.76 lb, Temperature 500 °F [cm^3/10 min] Melt Volume Rate; ISO 1133 18 g/10 min @Load 2.16 kg, Temperature 260 °C 18 g/10 min @Load 4.76 lb, Temperature 500 °F ASTM D 1238 Mechanical Properties力學性能 Metric公制數據 English英制數據 Comments測試方法 Tensile Strength at Break斷裂拉伸強度 50.0 MPa 7250 psi 50 mm/min; ISO 527 58.0 MPa 8410 psi Type I, 50 mm/min; ASTM D 638 Tensile Strength, Yield屈服拉伸強度 65.0 MPa 9430 psi Type I, 50 mm/min; ASTM D 638 65.0 MPa 9430 psi 50 mm/min; ISO 527 Elongation at Break斷裂伸長率 90 % 90 % 50 mm/min; ISO 527 100 % 100 % Type I, 50 mm/min; ASTM D 638 Elongation at Yield屈服伸長率 4.0 % 4.0 % 50 mm/min; ISO 527 4.1 % 4.1 % Type I, 50 mm/min; ASTM D 638 Tensile Modulus拉伸模量 2.60 GPa 377 ksi 5 mm/min; ASTM D 638 2.60 GPa 377 ksi 1 mm/min; ISO 527 Flexural Yield Strength彎曲屈服強度 96.0 MPa 13900 psi 2 mm/min; ISO 178 104 MPa 15100 psi 1.3 mm/min, 50 mm span; ASTM D 790 Flexural Modulus彎曲彈性模量 2.50 GPa 363 ksi 1.3 mm/min, 50 mm span; ASTM D 790 2.50 GPa 363 ksi 2 mm/min; ISO 178 Izod Impact, Notched懸臂梁缺口沖擊強度 1.75 J/cm @Temperature -30.0 °C 3.28 ft-lb/in @Temperature -22.0 °F ASTM D 256 7.00 J/cm @Temperature 23.0 °C 13.1 ft-lb/in @Temperature 73.4 °F ASTM D 256 Izod Impact, Notched懸臂梁缺口沖擊強度 (ISO) 10.0 kJ/m? @Temperature -30.0 °C 4.76 ft-lb/in? @Temperature -22.0 °F 80*10*4; ISO 180/1A 10.0 kJ/m? @Temperature -30.0 °C 4.76 ft-lb/in? @Temperature -22.0 °F 80*10*3; ISO 180/1A 20.0 kJ/m? @Temperature 23.0 °C 9.52 ft-lb/in? @Temperature 73.4 °F 80*10*3; ISO 180/1A 25.0 kJ/m? @Temperature 23.0 °C 11.9 ft-lb/in? @Temperature 73.4 °F 80*10*4; ISO 180/1A Charpy ImPAct, Notched夏比缺口沖擊 1.00 J/cm? @Temperature -30.0 °C 4.76 ft-lb/in? @Temperature -22.0 °F V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA 2.00 J/cm? @Temperature 23.0 °C 9.52 ft-lb/in? @Temperature 73.4 °F V-notch Edgew 80*10*3 sp=62mm; ISO 179/1eA 2.20 J/cm? @Temperature 23.0 °C 10.5 ft-lb/in? @Temperature 73.4 °F V-notch Edgew 80*10*4 sp=62mm; ISO 179/1eA Impact Test沖擊試驗數據 65.0 J @Temperature 23.0 °C 47.9 ft-lb @Temperature 73.4 °F Instrumented Impact Total Energy; ASTM D 3763 Electrical Properties電性能 Metric公制數據 English英制數據 Comments測試方法 Volume ResiSTivity體積電阻率 >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm IEC 60093 Surface Resistance表面電阻 >= 1.00e+15 ohm >= 1.00e+15 ohm ROA; IEC 60093 Dielectric Strength介電強度 17.0 kV/mm @Thickness 3.20 mm 432 kV/in @Thickness 0.126 in in oil; IEC 60243-1 25.0 kV/mm @Thickness 1.60 mm 635 kV/in @Thickness 0.0630 in in oil; IEC 60243-1 35.0 kV/mm @Thickness 0.800 mm 889 kV/in @Thickness 0.0315 in in oil; IEC 60243-1 Comparative Tracking Index跟蹤指數 175 - 250 V 175 - 250 V PLC code 3; UL 746A Hot Wire Ignition, HWI熱線圈點燃測試 15 - 30 sec 15 - 30 sec PLC code 3; UL 746A High Amp Arc Ignition, HAI高電流電弧點燃測試 >= 120 arcs >= 120 arcs surface, PLC code 0; UL 746A Thermal Properties熱性能 Metric公制數據 English英制數據 Comments測試方法 CTE, linear, Parallel to Flow線性熱膨脹系數 75.0 ?m/m-°C @Temperature -40.0 - 40.0 °C 41.7 ?in/in-°F @Temperature -40.0 - 104 °F ASTM E 831 75.0 ?m/m-°C @Temperature -40.0 - 40.0 °C 41.7 ?in/in-°F @Temperature -40.0 - 104 °F ISO 11359-2 CTE, linear, Transverse to Flow線性熱膨脹系數/橫向 75.0 ?m/m-°C @Temperature -40.0 - 40.0 °C 41.7 ?in/in-°F @Temperature -40.0 - 104 °F ASTM E 831 75.0 ?m/m-°C @Temperature -40.0 - 40.0 °C 41.7 ?in/in-°F @Temperature -40.0 - 104 °F ISO 11359-2 Thermal Conductivity導熱系數 0.200 W/m-K 1.39 BTU-in/hr-ft?-°F ISO 8302 Deflection Temperature at熱變形溫度 0.46 MPa (66 psi) 100 °C @Thickness 3.20 mm 212 °F @Thickness 0.126 in unannealed; ASTM D 648 Deflection Temperature at熱變形溫度 1.8 MPa (264 psi) 93.0 °C 199 °F Flatw 80*10*4 sp=64mm; ISO 75/Af 89.0 °C @Thickness 3.20 mm 192 °F @Thickness 0.126 in unannealed; ASTM D 648 99.0 °C @Thickness 6.40 mm 210 °F @Thickness 0.252 in unannealed; ASTM D 648 Vicat Softening Point維卡軟化點 110 °C 230 °F Rate B/50; ASTM D 1525 110 °C 230 °F Rate B/50; ISO 306 113 °C 235 °F Rate B/120; ISO 306 UL RTI, Electrical相對溫度指數 90.0 °C 194 °F UL 746B UL RTI, Mechanical with Impact機械沖擊熱指數 90.0 °C 194 °F UL 746B UL RTI, Mechanical without Impact無機械沖擊熱指數 90.0 °C 194 °F UL 746B Flammability, UL94阻燃等級 V-0 @Thickness 0.600 mm V-0 @Thickness 0.0236 in UL 94 V-0 @Thickness 0.750 mm V-0 @Thickness 0.0295 in UL 94 5VA @Thickness 1.50 mm 5VA @Thickness 0.0591 in UL 94 5VA @Thickness 3.00 mm 5VA @Thickness 0.118 in UL 94 Oxygen Index氧指數 34 % 34 % LOI; ISO 4589 Glow Wire Test灼熱絲試驗 775 °C @Thickness 3.00 mm 1430 °F @Thickness 0.118 in Glow Wire Ignitability Temperature; IEC 60695-2-13 775 °C @Thickness 0.750 mm 1430 °F @Thickness 0.0295 in Glow Wire Ignitability Temperature; IEC 60695-2-13 775 °C @Thickness 1.50 mm 1430 °F @Thickness 0.0591 in Glow Wire Ignitability Temperature; IEC 60695-2-13 800 °C @Thickness 3.00 mm 1470 °F @Thickness 0.118 in Glow Wire Ignitability Temperature; IEC 60695-2-13 825 °C @Thickness 1.00 mm 1520 °F @Thickness 0.0394 in Glow Wire Ignitability Temperature; IEC 60695-2-13 960 °C @Thickness 0.750 mm 1760 °F @Thickness 0.0295 in Glow Wire Flammability Index; IEC 60695-2-12 960 °C @Thickness 0.750 mm 1760 °F @Thickness 0.0295 in Glow Wire Flammability Index 960°C, passes at, by VDE; IEC 60695-2-12 SABIC CYCOLOY CX7240 PC/ABS生物相容的HC生物相容樹脂組合是一個無定形的PC/ABS樹脂，是很好的候選人為醫療市場。核心產品:聚碳酸酯/烯腈烯烯樹脂提供了兩個上最的性能平衡，對模具和oem都有吸引力。尺寸穩定性高模數樹脂的組合是一個非晶的，填充的，PC/ABS共混物，在FR和非FR產品中提供了出色的尺寸穩定性。阻燃性樹脂系列產品是一種適用于注塑成型、擠出成型和熱壓成型的非晶型PC/ABS復合材料。改善韌性基于標準的巨大力量聚碳酸酯?樹脂、高影響樹脂的這個家庭有更大的影響性能和低溫韌性。 特的視覺效果組合是一系列的樹脂，可以通過使用的顏料和聚合物技術在美學和功能上增強你的產品。如流線還原、陶瓷、光蔽和激光焊接等，可提供當今高技術部件所需的美學和功能分化。