中山電線電纜扭轉機廠家

符合GB/T4909.4-2009《裸電線試驗方法.扭轉試驗》與GB/T4909.7-2009《裸電線試驗方法.卷繞試驗》標準要求。本機常用于鋁線、鋼線、鋼桿、鋼芯鋁絞線等電線電纜進行卷繞扭轉試驗是鋼芯鋁絞線生產廠商必備的檢測工具。
In line with the GB/T4909.4-2009 "bare wire test method. The torsion test with GB/T4909.7-2009 standard for bare wire test method. The winding test requirements. The machine used for aluminium wire, steel wire, steel bar, steel core aluminum stranded wire and other wire and cable winding torsion test is indispensable for steel core aluminum stranded wire manufacturers detection tools.

1、壓線板工作寬度：200mm  
2、芯棒有效工作長度：70mm  
3、卷繞速度：1圈－70圈/min（可調）  
4、電線電纜卷繞扭轉試驗機芯棒范圍：
φ1.24mm、φ2.25mm、φ2.75mm、φ3mm、  
Φ3.5mm、φ3.72mm、φ4.25mm、φ4.75mm、  
Φ6.75mm、φ11.0mm、φ12mm、Φ14.0mm、  
φ17.0mm、Φ19.0mm、  
5、卷繞范圍：鋁線：Ф3mm-6mm用芯棒，  
Ф3mm以下建議用手工卷繞,  
鋼絲：Ф4mm以下  
6、扭轉配重砝碼：5×5Kg  
7、扭轉計數范圍：999999  
8、電機額定功率：0.185kw  
9、額定電壓：220V、50HZ  
10、外形尺寸約：約1400×500×800mm  
1, pressing line plate work width: 200 mm
2, mandrel effective working length: 70 mm
3, winding speed: 1-70 times/min (adjustable)
4, wire and cable winding machine core rod torsion test range:
From 1.24 mm, 2.25 mm, 3 mm, phi phi is 2.75 mm,
Φ, phi is 3.72 mm, 3.5 mm from 4.25 mm, 4.75 mm,
Φ of 6.75 mm, 11.0 mm, phi 12 mm, 14.0 mm Φ,
Phi is 17.0 mm, 19.0 mm Φ,
5, winding scope: aluminum wire: Ф 3 mm - 6 mm with a core rod,
The following recommendations to use manual winding Ф 3 mm,
Steel wire: Ф below 4 mm
6, torsion balance weight: 5 * 5 kg
7, reverse counting range: 999999
8, the motor rated power: 0.185 kw
9, rated voltage 220 v, 50 hz
About 10, appearance size: 1400 * 500 * 500 mm

1、試樣直徑：鋁線Ф1～6mm ，鋼線Ф1～6mm
2、芯棒直徑：Ф1.25～Ф16.00mm，≤Ф3mm建議用手工卷繞
3、主軸轉速：≤8r/min
4、右軸頭位移距離：≥40
5、總速比：可調
6、電機：功率0.75KW
7、轉速：1500r/min
8、扭轉計數范圍:999999
9、扭轉配重砝碼：5×5Kg
10、外形尺寸約：810mm×400mm×1400mm
1, the sample diameter: aluminium wire Ф 1 ~ 6 mm, steel wire Ф 1 ~ 6 mm
2, mandrel diameter: 1.25 ~ 16.00 mm Ф Ф, Ф 3 mm or less advice winding by hand
3, spindle speed: 8 r/min or less
4, the right shaft head displacement distance: 40 or higher
5, total ratio: is adjustable
: 6, motor power 0.75 KW
7, rotational speed: 1500 r/min
8, reverse counting range: 999999
9, torsion balance weight: 5 * 5 kg
About 10, appearance size: 810 mm * 400 mm * 1400 mm
標簽：     東莞市電線電纜扭轉   東莞市電線電纜扭轉廠家