中山跌落機測試機廠家

 
專門測試產品包裝后，受到墜落之受損情況，及評估搬運時，遭受落下之耐沖擊強度。符合GB4857.5《垂直沖擊跌落試驗方法》試驗標準
Specialized test after the product packaging, fall by the damage, and evaluation when handling, suffered from falling impact resistance strength. Meet GB4857.5 "vertical shock drop test method, test standards


1、試驗高度：40-170cm
2、試驗空間：80×60×40~170cm
3、高度運行：采用馬達傳動
4、高度控制：采用限位控制，到達設定高度后自動停止
5、具有上升、下降、自動停止功能
6、跌落試驗：采用氣動控制
7、托盤復位：采用氣動復位
8、落點：菱、角、面均可試驗
9、沖擊底板：1200×1200×90mm,鋼板厚度為8mm,底為多筋結構,使沖擊臺面上任何100mm2的面積上承受10kg的靜負荷時,其變形量不超過0.1mm
10、承受試件重量:150kg
1, the test height: 40-170 cm
2, test space: 80 * 60 * 40-170 cm
3, altitude: the motor drive
4, height cool: using limit cool, automatic stop when reach the setting height
5, with rising and falling, automatic stop function
6, drop test: adopt pneumatic cool
7, tray reset: adopt pneumatic reset
8 and placement: ling, the Angle, the surface can be test
9, impact plate: 1200 * 1200 * 1200 mm, the thickness of the steel plate is 8 mm, base for steel structure, make the shock table any area in 100 was under 10 kg static load, the deformation is less than 0.1 mm
10, the maximum specimen under weight: 150 kg
標簽：     東莞市跌落   東莞市跌落廠家